| # topo-grid-3x3.txt |
| |
| # /--------\ /-\ /-\ |
| # |Consumer|<---->| |<------->| | |
| # \--------/ \-/ \-/ |
| # ^ ^ ^ |
| # | | | 1Mbps/10ms delay |
| # v v v |
| # /-\ /-\ /-\ |
| # | |<-------->| |<------->| | |
| # \-/ \-/ \-/ |
| # ^ ^ ^ |
| # | | | |
| # v v v |
| # /-\ /-\ /--------\ |
| # | |<-------->| |<---->|Producer| |
| # \-/ \-/ \--------/ |
| |
| # any empty lines and lines starting with '#' symbol is ignored |
| # |
| # The file should contain exactly two sections: router and link, each starting with the corresponding keyword |
| # |
| # router section defines topology nodes and their relative positions (e.g., to use in visualizer) |
| router |
| |
| # each line in this section represents one router and should have the following data |
| # node comment yPos xPos |
| Node0 NA 3 1 |
| Node1 NA 3 2 |
| Node2 NA 3 3 |
| Node3 NA 2 1 |
| Node4 NA 2 2 |
| Node5 NA 2 3 |
| Node6 NA 1 1 |
| Node7 NA 1 2 |
| Node8 NA 1 3 |
| # Note that `node` can be any string. It is possible to access to the node by name using Names::Find, see examples. |
| |
| # link section defines point-to-point links between nodes and characteristics of these links |
| link |
| |
| # Each line should be in the following format (only first two are required, the rest can be omitted) |
| # srcNode dstNode bandwidth metric delay queue |
| # bandwidth: link bandwidth |
| # metric: routing metric |
| # delay: link delay |
| # queue: MaxPackets for transmission queue on the link (both directions) |
| Node0 Node1 1Mbps 1 10ms 10 |
| Node0 Node3 1Mbps 1 10ms 10 |
| Node1 Node2 1Mbps 1 10ms 10 |
| Node1 Node4 1Mbps 1 10ms 10 |
| Node2 Node5 1Mbps 1 10ms 10 |
| Node3 Node4 1Mbps 1 10ms 10 |
| Node3 Node6 1Mbps 1 10ms 10 |
| Node4 Node5 1Mbps 1 10ms 10 |
| Node4 Node7 1Mbps 1 10ms 10 |
| Node5 Node8 1Mbps 1 10ms 10 |
| Node6 Node7 1Mbps 1 10ms 10 |
| Node7 Node8 1Mbps 1 10ms 10 |
| |