test_nack/nack-test.sh

#!/usr/bin/env bash
source ../multi-host.conf
workDir=$(pwd)
logDir=$workDir/logs
testLogA=$logDir/nack-scenario-A.log
testLogB=$logDir/nack-scenario-B.log
testLogC=$logDir/nack-scenario-C.log
testLogD=$logDir/nack-scenario-D.log
mkdir -p $workDir/logs

clean_up() {

  dataB=$1
  dataC=$2
  echo "killing nfd on B, C and D..."
  ssh $CTRL_B "sudo killall nfd >> $testLogB 2>&1 &\
               sudo /sbin/tc qdisc del dev $dataB root"
  ssh $CTRL_C "sudo killall nfd >> $testLogC 2>&1 &\
               sudo /sbin/tc qdisc del dev $dataC root"
  ssh $CTRL_D "sudo killall nfd >> $testLogD 2>&1"

  sudo killall nfd 2>&1
  sleep 2
}

echo "Starting nfd on host A" > $testLogA

# start nfd on localhost (A) and set best-route strategy
nfd-start &> $logDir/nfdA.log
sleep 2
nfdc set-strategy / /localhost/nfd/strategy/best-route >> $testLogA

echo "Configure host B..."
# start nfd on hostB and set best-route-v1
ssh $CTRL_B "mkdir -p $logDir ; nfd-start &> $logDir/nfdB.log &\
  sleep 2 ; echo 'Starting nfd on host B' > $testLogB &\
  nfdc set-strategy / /localhost/nfd/strategy/best-route/%FD%01 >> $testLogB"

echo "Configure host C..."
# start nfd on hostC and set best-route strategy
ssh $CTRL_C "mkdir -p $logDir ; nfd-start &> $logDir/nfdC.log &\
  sleep 2 ; echo 'Starting nfd on host C' > $testLogC &\
  nfdc set-strategy / /localhost/nfd/strategy/best-route >> $testLogC"

echo "Configure host D..."
# start nfd on hostD and set best-route strategy
ssh $CTRL_D "mkdir -p $logDir ; nfd-start &> $logDir/nfdD.log &\
  sleep 2 ; echo 'Starting nfd on host D' > $testLogD &\
  nfdc set-strategy / /localhost/nfd/strategy/best-route >> $testLogD"

# A: create a route for prefix ndn:/P toward B and C,
# where the cost toward B (10) is lower than the cost toward C(20)
nfdc register -c 10 ndn:/P udp4://$IP4_B1:6363 >> $testLogA
nfdc register -c 20 ndn:/P udp4://$IP4_C1:6363 >> $testLogA

# D: create a route for prefix ndn:/P toward A
ssh $CTRL_D "echo 'creating a route for namespace ndn:/P toward A' >> $testLogD &\
  nfdc register -c 20 ndn:/P udp4://$IP4_A2:6363 >> $testLogD &"

echo "Start test 1..."
# D: express an Interest for ndn:/P/1, no retransmissions, wait 8000ms
ssh $CTRL_D "echo 'express an Interest for ndn:/P/1' >> $testLogD &\
  test-nack-consumer -p ndn:/P/1 -w 8000 > $logDir/test1.log"

scp $CTRL_D:$logDir/test1.log $logDir/test1.log

echo "Analyzing result of test 1..."
received=$(tail -n 1  $logDir/test1.log | awk '{print $1}')
if [[ "$received" == "NACK" ]]
then
  echo "FAIL: A returned unexpected Nack while Nack is not expected if not all &\
        upstreams return Nack. The test doesn't retransmit the Interest, and &\
        therefore A didn't try all possible upstreams to return Nack from all. &\
        Check test1 log for details."
  clean_up
exit 1
fi

echo "Start test 2..."
# D: express an Interest for ndn:/P/2, retransmit with new nonce, wait 8000ms
ssh $CTRL_D "echo 'express an Interest for ndn:/P/2' >> $testLogD &\
  test-nack-consumer -p ndn:/P/2 -r 2000 -w 8000 > $logDir/test2.log"

scp $CTRL_D:$logDir/test2.log $logDir/test2.log

echo "Analyzing result of test 2..."
received=$(tail -n 1 $logDir/test2.log | awk '{print $1}')
if [[ "$received" == "NACK" ]]
then
echo "FAIL: A returned unexpected Nack. Nack is not expected when one or &\
      upstreams time out, even if some upstreams return Nack. &\
      Check test2 log for details."
clean_up
exit 1
fi

echo "Setup test 3..."
# get data interface of host B
dataB=$(ssh $CTRL_B "netstat -ie | grep -B1 $IP4_B1 | head -n1" | awk '{print $1}')

# B: configure best-route strategy and get the set link delay to 500 ms
ssh $CTRL_B "nfdc set-strategy / /localhost/nfd/strategy/best-route >> $testLogB &\
  sudo /sbin/tc qdisc add dev $dataB root netem delay 500ms >> $testLogB "

# get data interface of host C
dataC=$(ssh $CTRL_C "netstat -ie | grep -B1 $IP4_C1 | head -n1" | awk '{print $1}')

# B: configure link delay to 500 ms
ssh $CTRL_C "sudo /sbin/tc qdisc add dev $dataC root netem delay 500ms >> $testLogC"

echo "Start test 3..."
# D: express an Interest for ndn:/P/3, retransmit with new nonce after 200ms, wait 3000ms
ssh $CTRL_D "echo 'express an Interest for ndn:/P/3' >> $testLogD &\
  test-nack-consumer -p ndn:/P/3 -r 200 -w 3000 > $logDir/test3.log"

scp $CTRL_D:$logDir/test3.log $logDir/test3.log

echo "Analyzing result of test 3..."
reason=$(grep NACK $logDir/test3.log | awk '{print $NF}')
NACK_count=$(grep NACK $logDir/test3.log | wc -l)

if [ $NACK_count -ne 1 ] || [[ "$reason" != "NoRoute" ]]
then
  echo "FAIL: A should return exactly one Nack after both upstreams have returned Nack. &\
        Reason should be 'NoRoute'. Test returned $NACK_count Nacks, with reason $reason. &\
        Check test3 log for more details."
  clean_up $dataB $dataC
  exit 1
fi

echo "Setup test 4..."

# B: configure link delay to 1000 ms
ssh $CTRL_B "nfdc set-strategy / /localhost/nfd/strategy/best-route >> $testLogB&\
  sudo /sbin/tc qdisc change dev $dataB root netem delay 1000ms >> $testLogB"

# D: express an Interest for ndn:/P/4, retransmit with new nonce after 200ms, wait 3000ms
ssh $CTRL_D "echo 'express an Interest for ndn:/P/4' >> $testLogD &\
  test-nack-consumer -p ndn:/P/4 -r 200 -w 3000 > $logDir/test4.log"

scp $CTRL_D:$logDir/test4.log $logDir/test4.log

echo "Analyzing result of test 4"
reason=$(grep NACK $logDir/test4.log | awk '{print $NF}')
NACK_count=$(grep NACK $logDir/test4.log | wc -l)
nonce2=$(grep "Sending Interest 2:" $logDir/test4.log | awk '{print $NF}')
NACK_nonce=$(grep NACK $logDir/test4.log | awk '{for(i=1;i<=NF;i++){if($i~/^Nonce/){print $(i+1)}}}'
)

if [ $NACK_count -ne 1 ] || [[ "$reason" != "NoRoute" ]] || [ "$NACK_nonce" -ne "$nonce2" ]
then
  echo "FAIL: A should return exactly one Nack that should carry the latest incoming Nonce \
  from downstream. Reason should be 'NoRoute'. Test returned $NACK_count Nacks, with nonce &\
  $NACK_nonce and reason $reason. Check test4 log for test details."
  clean_up $dataB $dataC
exit 1
fi

# cleanup
clean_up $dataB $dataC
echo "Test passed successfully"
exit 0