| # This is configuration for multiple hosts testing scenarios. |
| # Tests that involves multiple hosts should be run on host A from this topology: |
| # B[1]---| |
| # +---[1]A[2]---[1]R[2]---[1]D |
| # C[1]---| |
| # |
| # CTRL_* are used to ssh into other hosts. (eg. `ssh $CTRL_B` gets you a shell on B) |
| # IP4_* (and IP6_* if needed) are used to send experiment packets (eg. `nfdc create udp4://$IP4_C1` creates a tunnel). |
| # |
| # suggested subnet mask: |
| # IPv4: /24 |
| # IPv6: /64 |
| # |
| # Sample config: |
| # CTRL_B=10.0.0.1 |
| # CTRL_C=10.0.0.3 |
| # CTRL_D=10.0.0.18 |
| # CTRL_R=10.0.0.10 |
| # IP4_A1=10.0.0.2 |
| # IP4_B1=10.0.0.1 |
| # IP4_C1=10.0.0.3 |
| # IP4_A2=10.1.0.1 |
| # IP4_R1=10.1.0.2 |
| # IP4_R2=10.2.0.1 |
| # IP4_D1=10.2.0.2 |
| # IP6_A1=fd8c:edca:0f3c:10f4::2 |
| # IP6_B1=fd8c:edca:0f3c:10f4::1 |
| # IP6_C1=fd8c:edca:0f3c:10f4::3 |
| # IP6_A2=fd8c:edca:0f3c:10f5::9 |
| # IP4_R1=fd8c:edca:0f3c:10f5::a |
| # IP4_R2=fd8c:edca:0f3c:10f6::11 |
| # IP6_D1=fd8c:edca:0f3c:10f6::12 |
| CTRL_B=10.0.0.1 |
| CTRL_C=10.0.0.3 |
| CTRL_D=10.0.0.18 |
| CTRL_R=10.0.0.10 |
| IP4_A1=10.0.0.2 |
| IP4_B1=10.0.0.1 |
| IP4_C1=10.0.0.3 |
| IP4_A2=10.0.0.9 |
| IP4_R1=10.0.0.10 |
| IP4_R2=10.0.0.25 |
| IP4_D1=10.0.0.26 |
| IP6_A1=fd8c:edca:0f3c:10f4::2 |
| IP6_B1=fd8c:edca:0f3c:10f4::1 |
| IP6_C1=fd8c:edca:0f3c:10f4::3 |
| IP6_A2=fd8c:edca:0f3c:10f4::9 |
| IP4_R1=fd8c:edca:0f3c:10f4::a |
| IP4_R2=fd8c:edca:0f3c:10f4::11 |
| IP6_D1=fd8c:edca:0f3c:10f4::12 |