docs/INSTALL.rst - NFD - Gitiles

 Getting Started with NFD
 ========================

 Installing NFD from Binaries
 ----------------------------

 We provide NFD binaries for the supported platforms, which are the preferred installation
 method. In addition to simplifying installation, the binary release also includes automatic
 initial configuration and platform-specific tools to automatically start NFD and related
 daemons.  In particular, on macOS the binary release of NFD comes as part of `NDN Control
 Center <https://named-data.net/codebase/applications/ndn-control-center/>`__ and provides a
 convenient way to configure and launch NFD daemon.  :ref:`PPA packages for Ubuntu <Install NFD
 Using the NDN PPA Repository on Ubuntu Linux>` include ``upstart`` and ``systemd``
 configuration to automatically start daemon after boot.

 Besides officially supported platforms, NFD is known to work on: Fedora 20+, CentOS 6+, Gentoo
 Linux, Raspberry Pi, OpenWRT, FreeBSD 10+, and several `other platforms
 <https://redmine.named-data.net/projects/nfd/wiki/Wiki#Installation-experiences-for-selected-platforms>`__.
 We would also appreciate feedback and help packaging NDN releases for other platforms.

 .. _Install NFD Using the NDN PPA Repository on Ubuntu Linux:

 Install NFD Using the NDN PPA Repository on Ubuntu Linux
 --------------------------------------------------------

 NFD binaries and related tools for Ubuntu 14.04 and 16.04 can be installed using PPA
 packages from named-data repository.  First, you will need to add ``named-data/ppa``
 repository to binary package sources and update list of available packages.

 Preliminary steps if you have not used PPA packages before
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 To simplify adding new PPA repositories, Ubuntu provides ``add-apt-repository`` tool,
 which is not installed by default on some systems.

 ::

     sudo apt-get install software-properties-common

 Adding NDN PPA
 ~~~~~~~~~~~~~~

 After installing ``add-apt-repository``, run the following command to add `NDN PPA
 repository`_.

 ::

     sudo add-apt-repository ppa:named-data/ppa
     sudo apt-get update

 Installing NFD and other NDN packages
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 After you have added `NDN PPA repository`_, NFD and other NDN packages can be easily
 installed in a standard way, i.e., either using ``apt-get`` as shown below or using any
 other package manager, such as Synaptic Package Manager:

 ::

     sudo apt-get install nfd

 For the list of available packages, refer to `NDN PPA repository`_ homepage.

 .. _NDN PPA repository: https://launchpad.net/~named-data/+archive/ppa

 Building from Source
 --------------------

 Downloading from Git
 ~~~~~~~~~~~~~~~~~~~~

 The first step is to obtain the source code for ``NFD`` and, its main dependency, the
 ``ndn-cxx`` library.  If you are not planning to work with the bleeding edge code, make
 sure you checkout the correct release tag (e.g., ``*-0.6.0``) for both repositories:

 ::

     # Download ndn-cxx
     git clone https://github.com/named-data/ndn-cxx

     # Download NFD
     git clone --recursive https://github.com/named-data/NFD

 .. note::
    While we strive to ensure that the latest version (master branch) of NFD and ndn-cxx
    always properly compiles and works, sometimes there could be problems.  In these cases, use
    the latest released version.

 Prerequisites
 ~~~~~~~~~~~~~

 Install the `ndn-cxx library <https://named-data.net/doc/ndn-cxx/current/INSTALL.html>`__ and its requirements

 -  On macOS with Homebrew:

    ::

       brew install boost openssl pkg-config

 - On Ubuntu:

    ::

        sudo apt-get install build-essential pkg-config libboost-all-dev \
                             libsqlite3-dev libssl-dev libpcap-dev

 To build manpages and API documentation:

 - On macOS with Homebrew:

    ::

        brew install doxygen graphviz
        sudo easy_install pip
        sudo pip Sphinx

 - On Ubuntu:

    ::

        sudo apt-get install doxygen graphviz python-sphinx

 Build
 ~~~~~

 The following basic commands should be used to build NFD on Ubuntu and macOS with Homebrew:

 ::

     ./waf configure
     ./waf
     sudo ./waf install

 If you have installed ``ndn-cxx`` library and/or other dependencies into a non-standard path, you
 may need to modify ``PKG_CONFIG_PATH`` environment variable before running ``./waf configure``.
 For example,

 ::

     export PKG_CONFIG_PATH=/custom/lib/pkgconfig:$PKG_CONFIG_PATH
     ./waf configure
     ./waf
     sudo ./waf install

 Refer to ``./waf --help`` for more options that can be used during ``configure`` stage and
 how to properly configure and run NFD.

 .. note::
    If you are working on a source repository that has been compiled before, and you have
    upgraded one of the dependencies, please execute ``./waf distclean`` to clear object files
    and start over.

 Debug symbols
 ~~~~~~~~~~~~~

 The default compiler flags enable debug symbols to be included in binaries.  This
 potentially allows more meaningful debugging if NFD or other tools happen to crash.

 If it is undesirable, default flags can be easily overridden.  The following example shows
 how to completely disable debug symbols and configure NFD to be installed into ``/usr``
 with configuration in ``/etc`` folder.

 ::

     CXXFLAGS="-O2" ./waf configure --prefix=/usr --sysconfdir=/etc
     ./waf
     sudo ./waf install

 .. note::
    For Ubuntu PPA packages debug symbols are available in ``*-dbg`` packages.

 Customize Compiler
 ~~~~~~~~~~~~~~~~~~

 To choose a custom C++ compiler for building NFD, set the ``CXX`` environment variable
 to point to the compiler binary. For example, to select the clang compiler on a Linux
 system, use the following:

 ::

     CXX=clang++ ./waf configure

 Building documentation
 ~~~~~~~~~~~~~~~~~~~~~~

 NFD tutorials and API documentation can be built using the following commands:

 ::

     # Full set of documentation (tutorials + API) in build/docs
     ./waf docs

     # Only tutorials in `build/docs`
     ./waf sphinx

     # Only API docs in `build/docs/doxygen`
     ./waf doxgyen


 Manpages are automatically created and installed during the normal build process (e.g.,
 during ``./waf`` and ``./waf install``), if ``python-sphinx`` module is detected during
 ``./waf configure`` stage.  By default, manpages are installed into
 ``${PREFIX}/share/man`` (where default value for ``PREFIX`` is ``/usr/local``). This
 location can be changed during ``./waf configure`` stage using ``--prefix``,
 ``--datarootdir``, or ``--mandir`` options.

 For more details, refer to ``./waf --help``.

 Initial configuration
 ---------------------

 .. note::
     If you have installed NFD from binary packages, the package manager has already
     installed initial configuration and you can safely skip this section.

 General
 ~~~~~~~

 After installing NFD from source, you need to create a proper config file.  If default
 location for ``./waf configure`` was used, this can be accomplished by simply copying the
 sample configuration file:

 ::

     sudo cp /usr/local/etc/ndn/nfd.conf.sample /usr/local/etc/ndn/nfd.conf

 NFD Security
 ~~~~~~~~~~~~

 NFD provides mechanisms to enable strict authorization for all management commands. In
 particular, one can authorize only specific public keys to create new Faces or change the
 forwarding strategy for specific namespaces. For more information about how to generate
 private/public key pair, generate self-signed certificate, and use this self-signed
 certificate to authorize NFD management commands, refer to :ref:`How to configure NFD
 security` FAQ question.

 In the sample configuration file, all authorizations are disabled, effectively allowing
 anybody on the local machine to issue NFD management commands. **The sample file is
 intended only for demo purposes and MUST NOT be used in a production environment.**

 Running
 -------

 Starting
 ~~~~~~~~

 If you have installed NFD from source code, it is recommended to start NFD with the
 ``nfd-start`` script:

 ::

     nfd-start

 On macOS it may ask for your keychain password or ask ``nfd wants to sign using key in
 your keychain.`` Enter your keychain password and click Always Allow.

 Later, you can stop NFD with ``nfd-stop`` or by simply killing the ``nfd`` process.

 If you have installed NFD using a package manager, you can start and stop NFD service using the
 operating system's service manager (such as Upstart, systemd, or launchd) or using
 "Automatically start NFD" option in NDN Control Center app.

 Connecting to remote NFDs
 ~~~~~~~~~~~~~~~~~~~~~~~~~

 To create a UDP tunnel to a remote NFD, execute the following command in terminal:

 ::

     nfdc face create udp://<other host>

 where ``<other host>`` is the name or IP address of the other host (e.g.,
 ``udp://spurs.cs.ucla.edu``). This outputs:

 ::

     face-created id=308 local=udp4://10.0.2.15:6363 remote=udp4://131.179.196.46:6363 persistency=persistent

 To add a route ``/ndn`` toward the remote NFD, execute the following command in terminal:

 ::

     nfdc route add /ndn udp://<other host>

 This outputs:

 ::

     route-add-accepted prefix=/ndn nexthop=308 origin=static cost=0 flags=child-inherit expires=never

 The ``/ndn`` means that NFD will forward all Interests that start with ``/ndn`` through the
 face to the other host.  If you only want to forward Interests with a certain prefix, use it
 instead of ``/ndn``.  This only forwards Interests to the other host, but there is no "back
 route" for the other host to forward Interests to you.  For that, you can rely on automatic
 prefix propagation feature of NFD or go to the other host and use ``nfdc`` to add the route.

 Playing with NFD
 ----------------

 After you haved installed, configured, and started NFD, you can try to install and play
 with the following:

 Sample applications:

 - `Simple examples in ndn-cxx library <https://named-data.net/doc/ndn-cxx/current/examples.html>`_

    If you have installed ndn-cxx from source, you already have compiled these:

    +  examples/producer
    +  examples/consumer
    +  examples/consumer-with-timer

 - `Introductory examples of NDN-CCL
   <https://redmine.named-data.net/projects/application-development-documentation-guides/wiki/Step-By-Step_-_Common_Client_Libraries>`_

 Real applications and libraries:

    + `ndn-tools - NDN Essential Tools <https://github.com/named-data/ndn-tools>`_
    + `ndn-traffic-generator - Traffic Generator For NDN
      <https://github.com/named-data/ndn-traffic-generator>`_
    + `repo-ng - Next generation of NDN repository <https://github.com/named-data/repo-ng>`_
    + `ChronoChat - Multi-user NDN chat application <https://github.com/named-data/ChronoChat>`_
    + `ChronoSync - Sync library for multiuser realtime applications for NDN
      <https://github.com/named-data/ChronoSync>`_
	Getting Started with NFD
	========================

	Installing NFD from Binaries
	----------------------------

	We provide NFD binaries for the supported platforms, which are the preferred installation
	method. In addition to simplifying installation, the binary release also includes automatic
	initial configuration and platform-specific tools to automatically start NFD and related
	daemons. In particular, on macOS the binary release of NFD comes as part of `NDN Control
	Center <https://named-data.net/codebase/applications/ndn-control-center/>`__ and provides a
	convenient way to configure and launch NFD daemon. :ref:`PPA packages for Ubuntu <Install NFD
	Using the NDN PPA Repository on Ubuntu Linux>` include ``upstart`` and ``systemd``
	configuration to automatically start daemon after boot.

	Besides officially supported platforms, NFD is known to work on: Fedora 20+, CentOS 6+, Gentoo
	Linux, Raspberry Pi, OpenWRT, FreeBSD 10+, and several `other platforms
	<https://redmine.named-data.net/projects/nfd/wiki/Wiki#Installation-experiences-for-selected-platforms>`__.
	We would also appreciate feedback and help packaging NDN releases for other platforms.

	.. _Install NFD Using the NDN PPA Repository on Ubuntu Linux:

	Install NFD Using the NDN PPA Repository on Ubuntu Linux
	--------------------------------------------------------

	NFD binaries and related tools for Ubuntu 14.04 and 16.04 can be installed using PPA
	packages from named-data repository. First, you will need to add ``named-data/ppa``
	repository to binary package sources and update list of available packages.

	Preliminary steps if you have not used PPA packages before
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	To simplify adding new PPA repositories, Ubuntu provides ``add-apt-repository`` tool,
	which is not installed by default on some systems.

	::

	sudo apt-get install software-properties-common

	Adding NDN PPA
	~~~~~~~~~~~~~~

	After installing ``add-apt-repository``, run the following command to add `NDN PPA
	repository`_.

	::

	sudo add-apt-repository ppa:named-data/ppa
	sudo apt-get update

	Installing NFD and other NDN packages
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	After you have added `NDN PPA repository`_, NFD and other NDN packages can be easily
	installed in a standard way, i.e., either using ``apt-get`` as shown below or using any
	other package manager, such as Synaptic Package Manager:

	::

	sudo apt-get install nfd

	For the list of available packages, refer to `NDN PPA repository`_ homepage.

	.. _NDN PPA repository: https://launchpad.net/~named-data/+archive/ppa

	Building from Source
	--------------------

	Downloading from Git
	~~~~~~~~~~~~~~~~~~~~

	The first step is to obtain the source code for ``NFD`` and, its main dependency, the
	``ndn-cxx`` library. If you are not planning to work with the bleeding edge code, make
	sure you checkout the correct release tag (e.g., ``*-0.6.0``) for both repositories:

	::

	# Download ndn-cxx
	git clone https://github.com/named-data/ndn-cxx

	# Download NFD
	git clone --recursive https://github.com/named-data/NFD

	.. note::
	While we strive to ensure that the latest version (master branch) of NFD and ndn-cxx
	always properly compiles and works, sometimes there could be problems. In these cases, use
	the latest released version.

	Prerequisites
	~~~~~~~~~~~~~

	Install the `ndn-cxx library <https://named-data.net/doc/ndn-cxx/current/INSTALL.html>`__ and its requirements

	- On macOS with Homebrew:

	::

	brew install boost openssl pkg-config

	- On Ubuntu:

	::

	sudo apt-get install build-essential pkg-config libboost-all-dev \
	libsqlite3-dev libssl-dev libpcap-dev

	To build manpages and API documentation:

	- On macOS with Homebrew:

	::

	brew install doxygen graphviz
	sudo easy_install pip
	sudo pip Sphinx

	- On Ubuntu:

	::

	sudo apt-get install doxygen graphviz python-sphinx

	Build
	~~~~~

	The following basic commands should be used to build NFD on Ubuntu and macOS with Homebrew:

	::

	./waf configure
	./waf
	sudo ./waf install

	If you have installed ``ndn-cxx`` library and/or other dependencies into a non-standard path, you
	may need to modify ``PKG_CONFIG_PATH`` environment variable before running ``./waf configure``.
	For example,

	::

	export PKG_CONFIG_PATH=/custom/lib/pkgconfig:$PKG_CONFIG_PATH
	./waf configure
	./waf
	sudo ./waf install

	Refer to ``./waf --help`` for more options that can be used during ``configure`` stage and
	how to properly configure and run NFD.

	.. note::
	If you are working on a source repository that has been compiled before, and you have
	upgraded one of the dependencies, please execute ``./waf distclean`` to clear object files
	and start over.

	Debug symbols
	~~~~~~~~~~~~~

	The default compiler flags enable debug symbols to be included in binaries. This
	potentially allows more meaningful debugging if NFD or other tools happen to crash.

	If it is undesirable, default flags can be easily overridden. The following example shows
	how to completely disable debug symbols and configure NFD to be installed into ``/usr``
	with configuration in ``/etc`` folder.

	::

	CXXFLAGS="-O2" ./waf configure --prefix=/usr --sysconfdir=/etc
	./waf
	sudo ./waf install

	.. note::
	For Ubuntu PPA packages debug symbols are available in ``*-dbg`` packages.

	Customize Compiler
	~~~~~~~~~~~~~~~~~~

	To choose a custom C++ compiler for building NFD, set the ``CXX`` environment variable
	to point to the compiler binary. For example, to select the clang compiler on a Linux
	system, use the following:

	::

	CXX=clang++ ./waf configure

	Building documentation
	~~~~~~~~~~~~~~~~~~~~~~

	NFD tutorials and API documentation can be built using the following commands:

	::

	# Full set of documentation (tutorials + API) in build/docs
	./waf docs

	# Only tutorials in `build/docs`
	./waf sphinx

	# Only API docs in `build/docs/doxygen`
	./waf doxgyen


	Manpages are automatically created and installed during the normal build process (e.g.,
	during ``./waf`` and ``./waf install``), if ``python-sphinx`` module is detected during
	``./waf configure`` stage. By default, manpages are installed into
	``${PREFIX}/share/man`` (where default value for ``PREFIX`` is ``/usr/local``). This
	location can be changed during ``./waf configure`` stage using ``--prefix``,
	``--datarootdir``, or ``--mandir`` options.

	For more details, refer to ``./waf --help``.

	Initial configuration
	---------------------

	.. note::
	If you have installed NFD from binary packages, the package manager has already
	installed initial configuration and you can safely skip this section.

	General
	~~~~~~~

	After installing NFD from source, you need to create a proper config file. If default
	location for ``./waf configure`` was used, this can be accomplished by simply copying the
	sample configuration file:

	::

	sudo cp /usr/local/etc/ndn/nfd.conf.sample /usr/local/etc/ndn/nfd.conf

	NFD Security
	~~~~~~~~~~~~

	NFD provides mechanisms to enable strict authorization for all management commands. In
	particular, one can authorize only specific public keys to create new Faces or change the
	forwarding strategy for specific namespaces. For more information about how to generate
	private/public key pair, generate self-signed certificate, and use this self-signed
	certificate to authorize NFD management commands, refer to :ref:`How to configure NFD
	security` FAQ question.

	In the sample configuration file, all authorizations are disabled, effectively allowing
	anybody on the local machine to issue NFD management commands. **The sample file is
	intended only for demo purposes and MUST NOT be used in a production environment.**

	Running
	-------

	Starting
	~~~~~~~~

	If you have installed NFD from source code, it is recommended to start NFD with the
	``nfd-start`` script:

	::

	nfd-start

	On macOS it may ask for your keychain password or ask ``nfd wants to sign using key in
	your keychain.`` Enter your keychain password and click Always Allow.

	Later, you can stop NFD with ``nfd-stop`` or by simply killing the ``nfd`` process.

	If you have installed NFD using a package manager, you can start and stop NFD service using the
	operating system's service manager (such as Upstart, systemd, or launchd) or using
	"Automatically start NFD" option in NDN Control Center app.

	Connecting to remote NFDs
	~~~~~~~~~~~~~~~~~~~~~~~~~

	To create a UDP tunnel to a remote NFD, execute the following command in terminal:

	::

	nfdc face create udp://<other host>

	where ``<other host>`` is the name or IP address of the other host (e.g.,
	``udp://spurs.cs.ucla.edu``). This outputs:

	::

	face-created id=308 local=udp4://10.0.2.15:6363 remote=udp4://131.179.196.46:6363 persistency=persistent

	To add a route ``/ndn`` toward the remote NFD, execute the following command in terminal:

	::

	nfdc route add /ndn udp://<other host>

	This outputs:

	::

	route-add-accepted prefix=/ndn nexthop=308 origin=static cost=0 flags=child-inherit expires=never

	The ``/ndn`` means that NFD will forward all Interests that start with ``/ndn`` through the
	face to the other host. If you only want to forward Interests with a certain prefix, use it
	instead of ``/ndn``. This only forwards Interests to the other host, but there is no "back
	route" for the other host to forward Interests to you. For that, you can rely on automatic
	prefix propagation feature of NFD or go to the other host and use ``nfdc`` to add the route.

	Playing with NFD
	----------------

	After you haved installed, configured, and started NFD, you can try to install and play
	with the following:

	Sample applications:

	- `Simple examples in ndn-cxx library <https://named-data.net/doc/ndn-cxx/current/examples.html>`_

	If you have installed ndn-cxx from source, you already have compiled these:

	+ examples/producer
	+ examples/consumer
	+ examples/consumer-with-timer

	- `Introductory examples of NDN-CCL
	<https://redmine.named-data.net/projects/application-development-documentation-guides/wiki/Step-By-Step_-_Common_Client_Libraries>`_

	Real applications and libraries:

	+ `ndn-tools - NDN Essential Tools <https://github.com/named-data/ndn-tools>`_
	+ `ndn-traffic-generator - Traffic Generator For NDN
	<https://github.com/named-data/ndn-traffic-generator>`_
	+ `repo-ng - Next generation of NDN repository <https://github.com/named-data/repo-ng>`_
	+ `ChronoChat - Multi-user NDN chat application <https://github.com/named-data/ChronoChat>`_
	+ `ChronoSync - Sync library for multiuser realtime applications for NDN
	<https://github.com/named-data/ChronoSync>`_