nfdc-face
=========

SYNOPSIS
--------
| nfdc face [list [[remote] <FACEURI>] [local <FACEURI>] [scheme <SCHEME>]]
| nfdc face show [id] <FACEID>
| nfdc face create [remote] <FACEURI> [[persistency] <PERSISTENCY>] [local <FACEURI>] [reliability on|off] [congestion-marking on|off] [congestion-marking-interval <MARKING-INTERVAL>] [default-congestion-threshold <CONGESTION-THRESHOLD>]
| nfdc face destroy [face] <FACEID|FACEURI>
| nfdc channel [list]

DESCRIPTION
-----------
In NFD, a face is the generalization of network interface.
It could be a physical network interface to communicate on a physical link,
an overlay communication channel between NFD and a remote node,
or an inter-process communication channel between NFD and a local application.

The **nfdc face list** command shows a list of faces, their properties, and statistics,
optionally filtered by remote endpoint, local endpoint, and FaceUri scheme.
When multiple filters are specified, returned faces must satisfy all filters.

The **nfdc face show** command shows properties and statistics of one specific face.

The **nfdc face create** command creates a UDP unicast, TCP, or Ethernet unicast face.
Local FaceUri is required for creating Ethernet unicast faces; otherwise it must be omitted.
The NDNLPv2 unicast reliability feature may be explicitly enabled by specifying **reliability on**
or explicitly disabled by specifying **reliability off**.
If enabled, this feature must also be enabled on the other endpoint to function properly.
Reliability is disabled by default.
The send queue congestion detection and signaling feature may be explicitly enabled by specifying
**congestion-marking on** or explicitly disabled by specifying **congestion-marking off**.
Congestion marking is disabled by default.
Parameters for this feature can set with the **congestion-marking-interval** option (specified in
milliseconds) and the **default-congestion-threshold** option (specified in bytes).

The **nfdc face destroy** command destroys an existing face.

The **nfdc channel list** command shows a list of channels.
Channels are listening sockets that can accept incoming connections and create new faces.

OPTIONS
-------
<FACEID>
    Numerical identifier of the face.
    It is displayed in the output of **nfdc face list** and **nfdc face create** commands.

<FACEURI>
    A URI representing the remote or local endpoint of a face.
    Examples:

    - udp4://192.0.2.1:6363
    - udp6://[2001:db8::1]:6363
    - udp://example.net
    - tcp4://192.0.2.1:6363
    - tcp6://[2001:db8::1]:6363
    - tcp://example.net
    - unix:///var/run/nfd.sock
    - fd://6
    - ether://[08:00:27:01:01:01]
    - dev://eth0

    When a hostname is specified, a DNS query is used to obtain the IP address.

<SCHEME>
    The scheme portion of either remote or local endpoint.
    Examples:

    - udp4
    - unix
    - dev

<PERSISTENCY>
    Either "persistent" or "permanent".
    A "persistent" face (the default) is closed when a socket error occurs.
    A "permanent" face survives socket errors, and is closed only with a **nfdc destroy** command.

<MARKING-INTERVAL>
    The initial marking interval (in milliseconds) during an incident of congestion.

<CONGESTION-THRESHOLD>
    This value serves two purposes:
    It is the maximum bound of the congestion threshold for the face, as well as the default
    threshold used if the face does not support retrieving the capacity of the send queue.

EXIT CODES
----------
0: Success

1: An unspecified error occurred

2: Malformed command line

3: Face not found (**nfdc face show** and **nfdc face destroy** only)

4: FaceUri canonization failed (**nfdc face create** and **nfdc face destroy** only)

5: Ambiguous: multiple matching faces are found (**nfdc face destroy** only)

EXAMPLES
--------
nfdc face list
    List all faces.

nfdc face list scheme udp4
    List all UDP-over-IPv4 faces.

nfdc face show id 300
    Show information about the face whose FaceId is 300.

nfdc face create remote udp://router.example.net
    Create a face with the specified remote FaceUri, keeping all other settings at their defaults.

nfdc face create remote ether://[08:00:27:01:01:01] local dev://eth2 persistency permanent
    Create a face with the specified remote FaceUri, local FaceUri, and persistency.

nfdc face create remote udp://router.example.net reliability on
    Create a face with the specified remote FaceUri and enable NDNLP reliability.

nfdc face create remote udp://router.example.net congestion-marking on congestion-marking-interval 100 default-congestion-threshold 65536
    Create a face with the specified remote FaceUri and enable congestion marking. Set the base
    congestion marking interval to 100 ms and the default congestion threshold to 65536 bytes.

nfdc face destroy 300
    Destroy the face whose FaceId is 300.

nfdc face destroy udp4://192.0.2.1:6363
    Destroy the face whose remote FaceUri is "udp4://192.0.2.1:6363".

SEE ALSO
--------
nfd(1), nfdc(1)