Adding slightly more complicated tutorial example
diff --git a/examples/ccnx-grid.cc b/examples/ccnx-grid.cc
index 15898aa..2565005 100644
--- a/examples/ccnx-grid.cc
+++ b/examples/ccnx-grid.cc
@@ -16,6 +16,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Author: Ilya Moiseenko <iliamo@cs.ucla.edu>
+ * Alexander Afanasyev <alexander.afanasyev@ucla.edu>
*/
#include "ns3/core-module.h"
@@ -24,40 +25,43 @@
#include "ns3/NDNabstraction-module.h"
#include "ns3/point-to-point-grid.h"
#include "ns3/ipv4-global-routing-helper.h"
-#include "ns3/netanim-module.h"
-
-#include <iostream>
-#include <sstream>
using namespace ns3;
NS_LOG_COMPONENT_DEFINE ("CcnxGrid");
-uint32_t nGrid = 3;
-Time finishTime = Seconds (20.0);
+/**
+ * This scenario simulates a grid topology (using PointToPointGrid module)
+ *
+ * (consumer) -- ( ) ----- ( )
+ * | | |
+ * ( ) ------ ( ) ----- ( )
+ * | | |
+ * ( ) ------ ( ) -- (producer)
+ *
+ * Grid size could be specified using --nGrid parameter (default 3)
+ *
+ * All links are 1Mbps with propagation 10ms delay.
+ *
+ * FIB is populated based on hacks of GlobalRoutingController: in
+ * addition to normal assignment of IP addresses for every NetDevice
+ * interface, every node is assigned an IP address that numerically
+ * equals to node id (i.e., if node id is 15, the special address is
+ * 0.0.0.15/255.255.255.255).
+ *
+ * Consumer requests data from producer with frequency 10 interests per second
+ * (interests contain constantly increasing sequence number).
+ *
+ * For every received interest, producer replies with a data packet, containing
+ * 1024 bytes of virtual payload.
+ *
+ * Simulation time is 20 seconds, unless --finish parameter is specified
+ *
+ * To run scenario and see what is happening, use the following command:
+ *
+ * NS_LOG=CcnxSimple:CcnxConsumer ./waf --run=ccnx-grid
+ */
-void PrintTime ()
-{
- NS_LOG_INFO (Simulator::Now ());
-
- Simulator::Schedule (Seconds (10.0), PrintTime);
-}
-
-void PrintFIBs ()
-{
- NS_LOG_INFO ("Outputing FIBs into [fibs.log]");
- Ptr<OutputStreamWrapper> routingStream = Create<OutputStreamWrapper> ("fibs.log", std::ios::out);
- for (NodeList::Iterator node = NodeList::Begin ();
- node != NodeList::End ();
- node++)
- {
- *routingStream->GetStream () << "Node " << (*node)->GetId () << "\n";
-
- Ptr<CcnxFib> fib = (*node)->GetObject<CcnxFib> ();
- NS_ASSERT_MSG (fib != 0, "Fire alarm");
- *routingStream->GetStream () << *fib << "\n\n";
- }
-}
int
main (int argc, char *argv[])
@@ -65,18 +69,16 @@
Config::SetDefault ("ns3::PointToPointNetDevice::DataRate", StringValue ("1Mbps"));
Config::SetDefault ("ns3::PointToPointChannel::Delay", StringValue ("10ms"));
Config::SetDefault ("ns3::DropTailQueue::MaxPackets", StringValue ("20"));
-
- Packet::EnableChecking();
- Packet::EnablePrinting();
- std::string animationFile = "";
- std::string strategy = "ns3::CcnxFloodingStrategy";
+ // Set maximum number of packets that will be cached (default 100)
+ Config::SetDefault ("ns3::CcnxContentStore::Size", StringValue ("1000"));
+
+ uint32_t nGrid = 3;
+ Time finishTime = Seconds (20.0);
CommandLine cmd;
cmd.AddValue ("nGrid", "Number of grid nodes", nGrid);
cmd.AddValue ("finish", "Finish time", finishTime);
- cmd.AddValue ("netanim", "NetAnim filename", animationFile);
- cmd.AddValue ("strategy", "CCNx forwarding strategy", strategy);
cmd.Parse (argc, argv);
PointToPointHelper p2p;
@@ -84,15 +86,13 @@
InternetStackHelper stack;
Ipv4GlobalRoutingHelper ipv4RoutingHelper ("ns3::Ipv4GlobalRoutingOrderedNexthops");
stack.SetRoutingHelper (ipv4RoutingHelper);
-
+
PointToPointGridHelper grid (nGrid, nGrid, p2p);
grid.BoundingBox(100,100,200,200);
// Install CCNx stack
NS_LOG_INFO ("Installing CCNx stack");
CcnxStackHelper ccnxHelper;
- ccnxHelper.SetForwardingStrategy (strategy);
- ccnxHelper.EnableLimits (true, Seconds(0.1));
ccnxHelper.InstallAll ();
// Install IP stack (necessary to populate FIB)
@@ -117,43 +117,20 @@
CcnxAppHelper consumerHelper ("ns3::CcnxConsumerCbr");
consumerHelper.SetPrefix (prefix.str ());
- consumerHelper.SetAttribute ("MeanRate", StringValue ("1Mbps"));
+ consumerHelper.SetAttribute ("Frequency", StringValue ("10")); // 10 interests a second
ApplicationContainer consumers = consumerHelper.Install (consumerNodes);
- // consumers.Start (Seconds (0.0));
- // consumers.Stop (finishTime);
-
CcnxAppHelper producerHelper ("ns3::CcnxProducer");
producerHelper.SetPrefix (prefix.str ());
producerHelper.SetAttribute ("PayloadSize", StringValue("1024"));
ApplicationContainer producers = producerHelper.Install (producer);
- // producers.Start(Seconds(0.0));
- // producers.Stop(finishTime);
-
- Simulator::Schedule (Seconds (1.0), PrintFIBs);
-
- Simulator::Schedule (Seconds (10.0), PrintTime);
-
- // NS_LOG_INFO ("FIB dump:\n" << *c.Get(0)->GetObject<CcnxFib> ());
- // NS_LOG_INFO ("FIB dump:\n" << *c.Get(1)->GetObject<CcnxFib> ());
-
Simulator::Stop (finishTime);
- AnimationInterface *anim = 0;
- if (animationFile != "")
- {
- anim = new AnimationInterface (animationFile);
- anim->SetMobilityPollInterval (Seconds (1));
- }
-
NS_LOG_INFO ("Run Simulation.");
Simulator::Run ();
Simulator::Destroy ();
NS_LOG_INFO ("Done!");
- if (anim != 0)
- delete anim;
-
return 0;
}
diff --git a/examples/wscript b/examples/wscript
index def6b0a..1b064a3 100644
--- a/examples/wscript
+++ b/examples/wscript
@@ -4,3 +4,5 @@
obj = bld.create_ns3_program('ccnx-simple', ['NDNabstraction'])
obj.source = 'ccnx-simple.cc'
+ obj = bld.create_ns3_program('ccnx-grid', ['NDNabstraction', 'internet', 'point-to-point', 'point-to-point-layout'])
+ obj.source = 'ccnx-grid.cc'