Mini-NDN nodes can be connected to an outside network indirectly by running NFD on the local machine:
(Mini-NDN node) ------ (NFD running on the host machine where Mini-NDN is running) ------- (External Network)
For this simple example, we use the default topology:
c----a----b----d
If we want node "a" to connect to the host machine, we need to add a "root" node which has a link with node "a."
To do so, the following lines can be added to bin/minindn before net.start():
root = Node( 'root', inNamespace=False ) net.addLink(root, 'a')
Adding these before net.start() is important as node "root" would then be assigned an IP automatically. Re-install Mini-NDN by issuing the following command in the mini-ndn folder:
sudo ./install.sh -i
Run Mini-NDN with the simple topology and issue ifconfig on the local machine to confirm the addition of the interface. You should be able to locate "root-eth0":
root-eth0 Link encap:Ethernet HWaddr 3e:eb:77:d2:6f:1f
inet addr:1.0.0.9 Bcast:1.0.0.11 Mask:255.255.255.252
inet6 addr: fe80::3ceb:77ff:fed2:6f1f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:34 errors:0 dropped:0 overruns:0 frame:0
TX packets:33 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2667 (2.6 KB) TX bytes:2797 (2.7 KB)
To make the IP address associated with this interface persistent, add the following line to /etc/network/interfaces and reboot your machine:
iface root-eth0 inet manual
After rebooting, run Mini-NDN and issue the following command:
mininet>net a a-eth0:b-eth0 a-eth1:c-eth0 a-eth2:root-eth0
Node "a" is connected to "root-eth0". Now issue "ifconfig a-eth2" on node "a":
mininet>a ifconfig a-eth2
a-eth2 Link encap:Ethernet HWaddr fa:76:d4:86:d3:ba
inet addr:1.0.0.10 Bcast:1.0.0.11 Mask:255.255.255.252
As learned from the previous step, the IP address of root-eth0 is 1.0.0.9.
mininet>a ping 1.0.0.9 PING 1.0.0.9 (1.0.0.9) 56(84) bytes of data. 64 bytes from 1.0.0.9: icmp_seq=1 ttl=64 time=0.137 ms 64 bytes from 1.0.0.9: icmp_seq=2 ttl=64 time=0.123 ms
The host machine will also be able to ping node "a":
VirtualBox:~$ ping 1.0.0.10 PING 1.0.0.10 (1.0.0.10) 56(84) bytes of data. 64 bytes from 1.0.0.10: icmp_seq=1 ttl=64 time=0.086 ms
Start NFD on the local machine by using:
sudo nfd
The "nfd-start" script cannot be used, since the script allows only one instance of NFD at a time. The NFD processes running on the Mini-NDN nodes will prevent the "nfd-start" script from working.
Now, using "nfdc register", we can register a route from node "a" in Mini-NDN to the NFD process on the host machine and from the host machine to an external machine.
Also, if the local machine has a public IP, Mini-NDN nodes can be reached via external machines.