diff --git a/docs/INSTALL.rst b/docs/INSTALL.rst
index da66e87..f496919 100644
--- a/docs/INSTALL.rst
+++ b/docs/INSTALL.rst
@@ -7,48 +7,36 @@
 Prerequisites
 -------------
 
--  `NFD <https://named-data.net/doc/NFD/>`_ and its requirements:
+-  `NFD <https://named-data.net/doc/NFD/>`_ and its dependencies
 
 Refer to `Getting started with NFD <https://named-data.net/doc/NFD/current/INSTALL.html>`_
 for detailed installation and running instruction.
 
--  ChronoSync library:
+-  ChronoSync library
 
-Download the ChronoSync library and build it according to the instructions at the following
-address:
+Download the ChronoSync library and build it according to the instructions available at
+https://github.com/named-data/ChronoSync#build
 
-   ::
+-  PSync library
 
-       https://github.com/named-data/ChronoSync#build
-
--  PSync library:
-
-Download the PSync library and build it according to the instructions at the following
-address:
-
-   ::
-
-       https://github.com/named-data/PSync#build
+Download the PSync library and build it according to the instructions available at
+https://github.com/named-data/PSync#build
 
 Build
 -----
 
-Execute the following commands to build NLSR:
-
-::
+Execute the following commands to build NLSR::
 
     ./waf configure
     ./waf
     sudo ./waf install
 
-Refer to ``./waf –help`` for more options that can be used during the configure stage and
+Refer to ``./waf --help`` for more options that can be used during the configure stage and
 how to properly configure NLSR.
 
 If your pkgconfig path is not set properly you can do the following before running ``./waf
-configure``
+configure``::
 
-::
-
-    export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/
-    or
+    export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
+    # or
     export PKG_CONFIG_PATH=/path/to/pkgconfig/on/your/machine
diff --git a/docs/conf.py b/docs/conf.py
index 68de944..050d44c 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -1,37 +1,53 @@
 # -*- coding: utf-8 -*-
 #
-# NLSR - Named Data Link State Routing Protocol documentation build configuration file, created by
-# sphinx-quickstart on Sun Apr  6 19:58:22 2014.
+# Configuration file for the Sphinx documentation builder.
 #
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
+# This file only contains a selection of the most common options. For a full
+# list see the documentation:
+# http://www.sphinx-doc.org/en/master/config
 
-import datetime
-import sys
-import os
+# -- Path setup --------------------------------------------------------------
 
 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
 # documentation root, use os.path.abspath to make it absolute, like shown here.
-sys.path.insert(0, os.path.abspath('.'))
+#
+# import os
+import sys
+# sys.path.insert(0, os.path.abspath('.'))
 
-# -- General configuration ------------------------------------------------
+
+# -- Project information -----------------------------------------------------
+
+project = u'Named Data Link State Routing Protocol (NLSR)'
+copyright = u'Copyright © 2014-2020 Named Data Networking Project.'
+author = u'Named Data Networking Project'
+
+# The short X.Y version
+#version = ''
+
+# The full version, including alpha/beta/rc tags
+#release = ''
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#today = ''
+# Else, today_fmt is used as the format for a strftime call.
+today_fmt = '%Y-%m-%d'
+
+
+# -- General configuration ---------------------------------------------------
 
 # If your documentation needs a minimal Sphinx version, state it here.
-#needs_sphinx = '1.0'
+#
+needs_sphinx = '1.1'
 
 # Add any Sphinx extension module names here, as strings. They can be
 # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
 # ones.
 extensions = [
+    'sphinx.ext.extlinks',
     'sphinx.ext.todo',
-    'redmine_issue'
 ]
 
 def addExtensionIfExists(extension):
@@ -39,218 +55,88 @@
         __import__(extension)
         extensions.append(extension)
     except ImportError:
-        sys.stderr.write("Extension '%s' in not available. "
+        sys.stderr.write("Extension '%s' not found. "
                          "Some documentation may not build correctly.\n" % extension)
-        sys.stderr.write("To install, use \n"
-                         "  sudo pip install %s\n" % extension.replace('.', '-'))
 
-# sphinxcontrib.googleanalytics is currently not working with the latest version of sphinx
-# if os.getenv('GOOGLE_ANALYTICS', None):
-#     addExtensionIfExists('sphinxcontrib.googleanalytics')
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix of source filenames.
-source_suffix = '.rst'
-
-# The encoding of source files.
-#source_encoding = 'utf-8-sig'
+addExtensionIfExists('sphinxcontrib.doxylink')
 
 # The master toctree document.
 master_doc = 'index'
 
-# General information about the project.
-project = u'NLSR - Named Data Link State Routing Protocol'
-copyright = u'2014-{}, Named Data Networking Project'.format(datetime.date.today().year)
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#language = None
-
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#today = ''
-# Else, today_fmt is used as the format for a strftime call.
-#today_fmt = '%B %d, %Y'
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
 
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path.
 exclude_patterns = []
 
-# The reST default role (used for this markup: `text`) to use for all
-# documents.
-#default_role = None
 
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#show_authors = False
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# A list of ignored prefixes for module index sorting.
-#modindex_common_prefix = []
-
-# If true, keep warnings as "system message" paragraphs in the built documents.
-#keep_warnings = False
-
-
-# -- Options for HTML output ----------------------------------------------
+# -- Options for HTML output -------------------------------------------------
 
 # The theme to use for HTML and HTML Help pages.  See the documentation for
 # a list of builtin themes.
-# html_theme = 'default'
+#
 html_theme = 'named_data_theme'
 
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-#html_theme_options = {}
-
 # Add any paths that contain custom themes here, relative to this directory.
-html_theme_path = ['./']
-
-# The name for this set of Sphinx documents.  If None, it defaults to
-# "<project> v<release> documentation".
-#html_title = None
-
-# A shorter title for the navigation bar.  Default is the same as html_title.
-#html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#html_logo = None
-
-# The name of an image file (within the static path) to use as favicon of the
-# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#html_favicon = None
+html_theme_path = ['.']
 
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
 # so a file named "default.css" will overwrite the builtin "default.css".
 html_static_path = ['_static']
 
-# Add any extra paths that contain custom files (such as robots.txt or
-# .htaccess) here, relative to this directory. These files are copied
-# directly to the root of the documentation.
-#html_extra_path = []
 
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
-
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-#html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#html_additional_pages = {}
-
-# If false, no module index is generated.
-#html_domain_indices = True
-
-# If false, no index is generated.
-#html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it.  The value of this option must be the
-# base URL from which the finished HTML is served.
-#html_use_opensearch = ''
-
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-html_file_suffix = ".html"
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'nlsr-docs'
-
-
-# -- Options for LaTeX output ---------------------------------------------
+# -- Options for LaTeX output ------------------------------------------------
 
 latex_elements = {
-# The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
+    # The paper size ('letterpaper' or 'a4paper').
+    #
+    # 'papersize': 'letterpaper',
 
-# The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
+    # The font size ('10pt', '11pt' or '12pt').
+    #
+    # 'pointsize': '10pt',
 
-# Additional stuff for the LaTeX preamble.
-#'preamble': '',
+    # Additional stuff for the LaTeX preamble.
+    #
+    # 'preamble': '',
+
+    # Latex figure (float) alignment
+    #
+    # 'figure_align': 'htbp',
 }
 
 # Grouping the document tree into LaTeX files. List of tuples
 # (source start file, target name, title,
 #  author, documentclass [howto, manual, or own class]).
 latex_documents = [
-  ('index', 'nlsr-docs.tex', u'NLSR - Named Data Link State Routing Protocol Documentation',
-   u'Named Data Networking Project', 'manual'),
+    ('index', 'nlsr-docs.tex', u'Named Data Link State Routing Protocol (NLSR)',
+     author, 'manual'),
 ]
 
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#latex_logo = None
 
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#latex_use_parts = False
-
-# If true, show page references after internal links.
-#latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-#latex_show_urls = False
-
-# Documents to append as an appendix to all manuals.
-#latex_appendices = []
-
-# If false, no module index is generated.
-#latex_domain_indices = True
-
-
-# -- Options for manual page output ---------------------------------------
+# -- Options for manual page output ------------------------------------------
 
 # One entry per manual page. List of tuples
 # (source start file, name, description, authors, manual section).
 man_pages = [
-    ('manpages/nlsr', 'nlsr', u'Named Data Link State Routing Protocol Daemon', None, 1),
-    ('manpages/nlsr.conf', 'nlsr.conf', u'Named Data Link State Routing Protocol Daemon config file', None, 5),
-    ('manpages/nlsrc', 'nlsrc', u'Command-line utility to interact with and collect statistics from NLSR', None, 1),
+    ('manpages/nlsr',      'nlsr',      u'Named Data Link State Routing daemon', None, 1),
+    ('manpages/nlsr.conf', 'nlsr.conf', u'Named Data Link State Routing daemon configuration file', None, 5),
+    ('manpages/nlsrc',     'nlsrc',     u'command-line utility to interact with and collect statistics from NLSR', None, 1),
 ]
 
-
 # If true, show URL addresses after external links.
-#man_show_urls = False
+#man_show_urls = True
 
-if os.getenv('GOOGLE_ANALYTICS', None):
-    googleanalytics_id = os.environ['GOOGLE_ANALYTICS']
-    googleanalytics_enabled = True
 
-redmine_project_url = "https://redmine.named-data.net/"
+# -- Custom options ----------------------------------------------------------
+
+doxylink = {
+    'nlsr': ('NLSR.tag', 'doxygen/'),
+}
+
+extlinks = {
+    'issue': ('https://redmine.named-data.net/issues/%s', 'issue #'),
+}
diff --git a/docs/doxygen.conf.in b/docs/doxygen.conf.in
index 2ecc2ad..5f041ce 100644
--- a/docs/doxygen.conf.in
+++ b/docs/doxygen.conf.in
@@ -32,7 +32,7 @@
 # title of most generated pages and in a few other places.
 # The default value is: My Project.
 
-PROJECT_NAME           = "NLSR - Named Data Link State Routing Protocol"
+PROJECT_NAME           = "NLSR: Named Data Link State Routing Protocol"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number. This
 # could be handy for archiving the generated documentation or if some version
@@ -232,7 +232,7 @@
 # members will be omitted, etc.
 # The default value is: NO.
 
-OPTIMIZE_OUTPUT_FOR_C  = YES
+OPTIMIZE_OUTPUT_FOR_C  = NO
 
 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
 # Python sources only. Doxygen will then generate output that is more tailored
@@ -408,7 +408,7 @@
 # scope will be included in the documentation.
 # The default value is: NO.
 
-EXTRACT_PACKAGE        = YES
+EXTRACT_PACKAGE        = NO
 
 # If the EXTRACT_STATIC tag is set to YES all static members of a file will be
 # included in the documentation.
@@ -524,7 +524,7 @@
 # name. If set to NO the members will appear in declaration order.
 # The default value is: NO.
 
-SORT_BRIEF_DOCS        = NO
+SORT_BRIEF_DOCS        = YES
 
 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
 # (brief and detailed) documentation of class members so that constructors and
@@ -536,7 +536,7 @@
 # detailed member documentation.
 # The default value is: NO.
 
-SORT_MEMBERS_CTORS_1ST = NO
+SORT_MEMBERS_CTORS_1ST = YES
 
 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
 # of group names into alphabetical order. If set to NO the group names will
@@ -1117,7 +1117,7 @@
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-HTML_DYNAMIC_SECTIONS  = NO
+HTML_DYNAMIC_SECTIONS  = YES
 
 # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
 # shown in the various tree structured indices initially; the user can expand
@@ -1355,7 +1355,7 @@
 # Minimum value: 0, maximum value: 20, default value: 4.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-ENUM_VALUES_PER_LINE   = 4
+ENUM_VALUES_PER_LINE   = 1
 
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
 # to set the initial width (in pixels) of the frame in which the tree is shown.
@@ -1916,18 +1916,14 @@
 # recursively expanded use the := operator instead of the = operator.
 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
 
-PREDEFINED             = DOXYGEN=1 \
+PREDEFINED             = DOXYGEN \
                          INIT_LOGGER(x)= \
-                         BOOST_STATIC_ASSERT(x)= \
                          BOOST_CONCEPT_ASSERT(x)= \
                          BOOST_CONCEPT_REQUIRES(x)= \
-                         DECL_OVERRIDE=override \
                          PUBLIC_WITH_TESTS_ELSE_PRIVATE=private \
                          PUBLIC_WITH_TESTS_ELSE_PROTECTED=protected \
                          PROTECTED_WITH_TESTS_ELSE_PRIVATE=private \
-                         VIRTUAL_WITH_TESTS \
-                         DECL_CLASS_FINAL=final \
-                         DECL_FINAL=final
+                         VIRTUAL_WITH_TESTS=
 
 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
 # tag can be used to specify a list of macro names that should be expanded. The
@@ -2264,7 +2260,7 @@
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
-DOT_MULTI_TARGETS      = NO
+DOT_MULTI_TARGETS      = YES
 
 # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
 # explaining the meaning of the various boxes and arrows in the dot generated
diff --git a/docs/redmine_issue.py b/docs/redmine_issue.py
deleted file mode 100644
index 0df2b1f..0000000
--- a/docs/redmine_issue.py
+++ /dev/null
@@ -1,70 +0,0 @@
-# -*- Mode: python; py-indent-offset: 4; indent-tabs-mode: nil; coding: utf-8; -*-
-# Based on http://doughellmann.com/2010/05/09/defining-custom-roles-in-sphinx.html
-
-"""Integration of Sphinx with Redmine.
-"""
-
-from docutils import nodes, utils
-from docutils.parsers.rst.roles import set_classes
-
-def redmine_role(name, rawtext, text, lineno, inliner, options={}, content=[]):
-    """Link to a Redmine issue.
-
-    Returns 2 part tuple containing list of nodes to insert into the
-    document and a list of system messages.  Both are allowed to be
-    empty.
-
-    :param name: The role name used in the document.
-    :param rawtext: The entire markup snippet, with role.
-    :param text: The text marked with the role.
-    :param lineno: The line number where rawtext appears in the input.
-    :param inliner: The inliner instance that called us.
-    :param options: Directive options for customization.
-    :param content: The directive content for customization.
-    """
-    try:
-        issue_num = int(text)
-        if issue_num <= 0:
-            raise ValueError
-    except ValueError:
-        msg = inliner.reporter.error(
-            'Redmine issue number must be a number greater than or equal to 1; '
-            '"%s" is invalid.' % text, line=lineno)
-        prb = inliner.problematic(rawtext, rawtext, msg)
-        return [prb], [msg]
-    app = inliner.document.settings.env.app
-    node = make_link_node(rawtext, app, 'issues', str(issue_num), options)
-    return [node], []
-
-def make_link_node(rawtext, app, type, slug, options):
-    """Create a link to a Redmine resource.
-
-    :param rawtext: Text being replaced with link node.
-    :param app: Sphinx application context
-    :param type: Link type (issue, changeset, etc.)
-    :param slug: ID of the thing to link to
-    :param options: Options dictionary passed to role func.
-    """
-    #
-    try:
-        base = app.config.redmine_project_url
-        if not base:
-            raise AttributeError
-    except AttributeError:
-        raise ValueError('redmine_project_url configuration value is not set')
-    #
-    slash = '/' if base[-1] != '/' else ''
-    ref = base + slash + type + '/' + slug + '/'
-    set_classes(options)
-    node = nodes.reference(rawtext, 'Issue #' + utils.unescape(slug), refuri=ref,
-                           **options)
-    return node
-
-def setup(app):
-    """Install the plugin.
-
-    :param app: Sphinx application context.
-    """
-    app.add_role('issue', redmine_role)
-    app.add_config_value('redmine_project_url', None, 'env')
-    return