diff --git a/README.md b/README.md
index 1dbc5f5..382bf5c 100644
--- a/README.md
+++ b/README.md
@@ -1,6 +1,9 @@
 NLSR - Named Data Link State Routing Protocol
 =============================================
 
+For complete documentation and more extensive information,
+please visit the [NLSR homepage](http://named-data.net/doc/NLSR/current/).
+
 ## Overview
 
 NLSR is a routing protocol in NDN that populates NDN's Routing Information Base. NLSR
@@ -28,9 +31,9 @@
 The source code and source-code installation instructions are always available at
 the following links:
 
-- [Installation](https://github.com/named-data/NLSR/blob/master/docs/INSTALL.md)
-- [Getting Started with NLSR](https://github.com/named-data/NLSR/blob/master/docs/GETTING-STARTED.md)
-- [Github NLSR repository](https://github.com/named-data/NLSR)
+- [Installation](http://named-data.net/doc/NLSR/current/INSTALL.html)
+- [Getting Started with NLSR](http://named-data.net/doc/NLSR/current/GETTING-STARTED.html)
+- [GitHub NLSR repository](https://github.com/named-data/NLSR)
 
 Additional information
 ----------------------
diff --git a/docs/RELEASE-NOTES.rst b/docs/RELEASE-NOTES.rst
index 9ecf411..a08af27 100644
--- a/docs/RELEASE-NOTES.rst
+++ b/docs/RELEASE-NOTES.rst
@@ -13,30 +13,21 @@
 
 **Included features**:
 
-- Produce a list of ranked forwarding options for each name prefix to facilitate NDN's adaptive forwarding strategies
-
-- Name Prefix advertisement
-
-  + Advertise availability of content through the configured router
+- Advertise availability of content through the configured router
 
 - Use `ChronoSync <https://github.com/named-data/ChronoSync>`_ to synchronize routers' LSA sequence numbers and Interest/Data to retrieve LSAs
 
-- Limit faces per prefix
+- Produce a list of ranked forwarding options for each name prefix to facilitate NDN's adaptive forwarding strategies
 
-  + Configure maximum number of faces per prefix in NFD's RIB
+- Configure maximum number of faces per prefix in NFD’s RIB
 
-- Automatic NFD tunnel configuration and maintenance to neighbors
+- Set up NFD tunnels to neighbors automatically and maintain the tunnels to neighbors
 
-- Routing protocol
+- Provide two routing protocols:
 
-  + Link State routing
-  + Hyperbolic routing
-
-    + Calculates route cost based on a node's polar coordinates
+  + Link State routing: calculate route cost based on link costs
+  + Hyperbolic routing: calculate route cost based on hyperbolic coordinates
 
 - Use a hierarchical trust model for routing within a single administrative domain
 
-- NFD Routing Information Base (RIB) consistency
-
-  + Provides shortest path next hops for efficient forwarding
-  + Keeps NFD's RIB updated on node failure and recovery
+- Keep NFD’s RIB updated on failure and recovery
diff --git a/docs/ROUTER-CONFIG.rst b/docs/ROUTER-CONFIG.rst
index f8dbf15..0b70831 100644
--- a/docs/ROUTER-CONFIG.rst
+++ b/docs/ROUTER-CONFIG.rst
@@ -51,12 +51,11 @@
 Step 2. Determining FaceUri
 ---------------------------
 
-Assume that ``/ndn/edu/arizona/%C1.Router/router3`` has hostname ``router3.arizona.edu``,
-``/ndn/edu/colostate/%C1.Router/router2`` has IP address ``79.123.10.145``, and that all
-routers in the network have agreed to sync data with name prefix ``/ndn/nlsr/sync``.
+Assume that ``/ndn/edu/arizona/%C1.Router/router3`` has hostname ``router3.arizona.edu`` and
+``/ndn/edu/colostate/%C1.Router/router2`` has IP address ``79.123.10.145``.
 ``/ndn/edu/memphis/%C1.Router/router1`` will consider FaceUri
-``udp4://router3.arizona.edu`` for router ``/ndn/edu/arizona/%C1.Router/router3`` and face
-uri ``udp4://79.123.10.145`` for router ``/ndn/edu/colostate/%C1.Router/router2``.
+``udp4://router3.arizona.edu`` for router ``/ndn/edu/arizona/%C1.Router/router3`` and
+FaceUri ``udp4://79.123.10.145`` for router ``/ndn/edu/colostate/%C1.Router/router2``.
 
 Step 3: Creating configuration file
 -----------------------------------
@@ -137,7 +136,7 @@
         ; the switch is used to set hyperbolic routing calculation in NLSR
 
         state off             ; default value 'off', set value 'on' to enable hyperbolic routing table
-                              ; calculation which turns link state routing 'off'. set value to 'dry-run"
+                              ; calculation which turns link state routing 'off'. set value to 'dry-run'
                               ; to test hyperbolic routing and compare with link state routing.
 
 
diff --git a/docs/index.rst b/docs/index.rst
index 77d189f..5c9ba33 100644
--- a/docs/index.rst
+++ b/docs/index.rst
@@ -19,7 +19,7 @@
 calculates the routing table using link-state or hyperbolic routing and produces multiple
 faces for each reachable name prefix in a single authoritative domain. NLSR will continue
 to evolve over time to include neighbor discovery and to become a full fledged
-inter-domain routing protocol for NDN.  The project design is presented in full detail in
+inter-domain routing protocol for NDN.  The protocol design is presented in full detail in
 the `NLSR Paper`_.
 
 NLSR Documentation
@@ -58,4 +58,4 @@
 
 
 .. _NLSR Wiki: http://redmine.named-data.net/projects/nlsr
-.. _NLSR Paper: http://conferences.sigcomm.org/sigcomm/2013/papers/icn/p15.pdf
+.. _NLSR Paper: http://www.cs.memphis.edu/~lanwang/paper/nlsr-final.pdf
diff --git a/nlsr.conf b/nlsr.conf
index 2ddb1e4..ffffe43 100644
--- a/nlsr.conf
+++ b/nlsr.conf
@@ -96,7 +96,7 @@
   ; the switch is used to set hyperbolic routing calculation in NLSR
 
   state off             ; default value 'off', set value 'on' to enable hyperbolic routing table
-                        ; calculation which turns link state routing 'off'. set value to 'dry-run"
+                        ; calculation which turns link state routing 'off'. set value to 'dry-run'
                         ; to test hyperbolic routing and compare with link state routing.