Delete README.md
diff --git a/README.md b/README.md
deleted file mode 100755
index 18880a1..0000000
--- a/README.md
+++ /dev/null
@@ -1,111 +0,0 @@
-NLSR0.0
-=======
-
-Named-data Link State Routing ( NLSR ):
- NLSR is routing protocol caluclate routing table dynamically and manipulate
-ccnd forwarding information base (FIB) based on routing table.
-
-1. Download:
- Check out the code from the github by following
-git://github.com/NDN-Routing/NLSR0.0.git
-
-2. Installation:
- For installation of NLSR you must need to have ccnd installed. Go to NLSR0.0.
-Then make it and install by following
-
-$make
-$sudo make install
-
-3. Configuring NLSR:
- For the explanation of configuring NLSR, we will consider following network topology.
-
-
- ---------
- | |
- | | /ndn/memphis.edu/castor
- ---------
- face9/ \ face11
- / \
- / \
- / \
- face7/ \ face10
- --------- --------- ---------
- | |face8 face11 | |face13 face7| |
- | |---------------| |--------------------| |
- --------- --------- ---------
- -/ndn/memphis.edu/pollux /ndn/memphis.edu/mira /ndn/memphis.edu/sirius
-
-
-3.1 Creating faces for neighbors
- For configuring of NLSR first system admin first need to create faces for the neighbors.
-For router having router-name /ndn/memphis.edu/castor, system admin need to create two faces for
-neighbors routers /ndn/memphis.edu/pollux and /ndn/memphis.edu/mira. By ccndc utility one can
-create face as below
-
-$ccndc add /ndn/memphis.edu/pollux udp pollux.cs.memphis.edu
-$ccndc add /ndn/memphis.edu/mira udp mira.cs.memphis.edu
-
-Let us assume that that face id for /ndn/memphis.edu/pollux is 9 and /ndn/memphis.edu/mira is 11.
-
-3.2 Configuration Commands
-3.2.1 router-name /name/prefix/of/router
- router-name commands assigns name of the router. Router-name is unique in the network and
-maintained by name management. This is mandatory configuration command.
-
-3.2.2 ccnneighbor /name/prefix/of/neighbor/router faceX.
- By this command router configures neighboring router. X is integer and must be precedeed
-by "face". faceX is the connecting face for that neighbors.
-
-3.2.3 ccnname /name/prefix/to/be/advertised
- With this configuration command router advertise name prefix
-
-3.2.4 lsdb-synch-interval secs
- its the time interval after which neighbors will synchronize Link State Database. Default
-value is 300.
-
-3.2.5 interest-retry tries
- its number of tries router will try if interest is timed out. Defualt value is 3.
-
-3.2.6 interest-resend-time secs
- its the amount of time after which interest for a content will timed out. Defualt value
-is 15.
-
-3.2.7 lsa-refresh-time secs
- its the amount of time after which router will regenerate its own LSDB and regenerate
-every LSA. Default value is 1800.
-
-3.2.8 router-dead-interval secs
- its the amounnt of time after which a router will consider its neighbor dead if it does
-not hear anything from the neighbor. Default value 3600.
-
-3.2.9 multi-path-face-num n
- with this command one activate to do multi-path routing. If n is greater than 1 then
-multi-path is triggered on and n faces will be added in ccnd fib after routing table calculation.
-Default value is 0 and then NLSR perform single path routing.
-
-3.2.10 logdir path/to/log/dir
- By this command one can configure where NLSR will write logfiles. By default NLSR will
-write log file to /home/nlsrLog/ directory.
-
-3.3 Sample configuration file
- Let assume that router /ndn/memphis.edu/castor wants to advertise two names
-/ndn/memphis.edu/cslab/netlab and /ndn/memphis.edu/cslab/wisemanet. Configuration file for
-/ndn/memphis.edu/castor will look like below
-
-!-----Configuration file starts here
-
-router-name /ndn/memphis.edu/castor
-ccnneighbor /ndn/memphis.edu/mira face10
-ccnneighbor /ndn/memphis.edu/pollux face9
-ccnname /ndn/memphis.edu/cslab/netlab
-ccnname /ndn/memphis.edu/cslab/wisemanet
-
-lsdb-synch-interval 350
-interest-retry 3
-interest-resend-time 10
-lsa-refresh-time 1800
-router-dead-interval 3600
-multi-path-face-num 2
-logdir /home/nlsrLog/
-
-!-----Configuration file ends here