diff --git a/AUTHORS.md b/AUTHORS.md
index 2fab7dd..37ece98 100644
--- a/AUTHORS.md
+++ b/AUTHORS.md
@@ -34,6 +34,7 @@
     * Nicholas Gordon      <nmgordon@memphis.edu>
     * Laqin Fan            <lfan1@memphis.edu>
     * Damian Coomes        <dmcoomes@memphis.edu>
+    * Saurab Dulal         <sdulal@memphis.edu>
 
 * University of California, Los Angeles
 
diff --git a/README-dev.md b/README-dev.md
index a8c564a..068051f 100644
--- a/README-dev.md
+++ b/README-dev.md
@@ -28,10 +28,13 @@
 
 If you are affiliated with an NSF-supported NDN project institution,
 please use the [NDN Team License Boilerplate]
-(http://redmine.named-data.net/projects/nlsr/wiki/NDN_Team_License_Boilerplate_(NLSR)).
+(https://redmine.named-data.net/projects/nlsr/wiki/NDN_Team_License_Boilerplate_(NLSR)).
 
 Recommendations
 ---------------
 
-NSLR code is subject to the code style, defined here:
-http://redmine.named-data.net/projects/nfd/wiki/CodeStyle
+NLSR code is subject to the code style, defined here:
+https://redmine.named-data.net/projects/nfd/wiki/CodeStyle
+
+NLSR Developer's guide can be found here:
+https://github.com/named-data/NLSR/blob/developers-guide/NLSR-Developers-Guide.pdf
\ No newline at end of file
diff --git a/README.md b/README.md
index 0a2d760..b9ca240 100644
--- a/README.md
+++ b/README.md
@@ -16,10 +16,10 @@
 Internet users and developers.  For more information about the licensing details and
 limitations, refer to [COPYING.md](https://github.com/named-data/NLSR/blob/master/COPYING.md).
 
-NLSR is developed by the members of the [NSF-sponsored NDN project team](http://named-data.net/project/participants/).
+NLSR is developed by the members of the [NSF-sponsored NDN project team](https://named-data.net/project/participants/).
 For more details, please refer to [AUTHORS.md](https://github.com/named-data/NLSR/blob/master/AUTHORS.md).
 Bug reports and feedback are highly appreciated and can be made through the
-[Redmine site](http://redmine.named-data.net/projects/nlsr).
+[Redmine site](https://redmine.named-data.net/projects/nlsr).
 
 The main design goal of NLSR is to provide a routing protocol to populate NDN's FIB.
 NLSR calculates the routing table using link-state or hyperbolic routing and produces
@@ -34,17 +34,17 @@
 The source code and source-code installation instructions are always available at
 the following links:
 
-- [Installation](http://named-data.net/doc/NLSR/current/INSTALL.html)
-- [Getting Started with NLSR](http://named-data.net/doc/NLSR/current/GETTING-STARTED.html)
+- [Installation](https://named-data.net/doc/NLSR/current/INSTALL.html)
+- [Getting Started with NLSR](https://named-data.net/doc/NLSR/current/GETTING-STARTED.html)
 - [GitHub NLSR repository](https://github.com/named-data/NLSR)
 
 Additional information
 ----------------------
 
 - [Contributor's Guide](https://github.com/named-data/NFD/blob/master/CONTRIBUTING.md)
-- [NLSR Wiki](http://redmine.named-data.net/projects/nlsr/wiki/)
+- [NLSR Wiki](https://redmine.named-data.net/projects/nlsr/wiki/)
 - Feature requests and bug reports are welcome on our
-  [NLSR on NDN Redmine](http://redmine.named-data.net/projects/nlsr)
+  [NLSR on NDN Redmine](https://redmine.named-data.net/projects/nlsr)
 - [NLSR Mailing List Sign Up](https://listserv.memphis.edu/scripts/wa.exe?GETPW1)
 - [NLSR Mailing List](https://listserv.memphis.edu/scripts/wa.exe?SUBED1=NLSR-HELP-L&A=1)
 - [NLSR Mailing List Archives](https://listserv.memphis.edu/scripts/wa.exe?A0=NLSR-HELP-L)
diff --git a/docs/SECURITY-CONFIG.rst b/docs/SECURITY-CONFIG.rst
index 769696c..048ee15 100644
--- a/docs/SECURITY-CONFIG.rst
+++ b/docs/SECURITY-CONFIG.rst
@@ -20,7 +20,7 @@
            router1     router2  router3    router4  router5     router6  router7
               |           |        |          |        |           |        |
               +           +        +          +        +           +        +
-            NLSR        NSLR     NSLR       NSLR     NSLR        NSLR     NSLR
+            NLSR        NLSR     NLSR       NLSR     NLSR        NLSR     NLSR
 
 Each entity's name and corresponding certificate name follow the
 convention below:
@@ -28,11 +28,11 @@
 ========  ===================================================== =================================  ===============================================
 Entity    Identity Name                                         Example                            Certificate Name Example
 --------  ----------------------------------------------------- ---------------------------------  -----------------------------------------------
-root      /\<network\>                                          /ndn                               /ndn/KEY/ksk-1/ID-CERT/%01
-site      /\<network\>/\<site\>                                 /ndn/edu/ucla                      /ndn/edu/ucla/KEY/ksk-2/ID-CERT/%01
-operator  /\<network\>/\<site\>/%C1.Operator/\<operator-name\>  /ndn/edu/ucla/%C1.Operator/op1     /ndn/edu/ucla/%C1.Operator/op1/KEY/ksk-3/ID-CERT/%01
-router    /\<network\>/\<site\>/%C1.Router/\<router-name\>      /ndn/edu/ucla/%C1.Router/rt1       /ndn/edu/ucla/%C1.Router/rt1/KEY/ksk-4/ID-CERT/%01
-NLSR      /\<network\>/\<site\>/%C1.Router/\<router-name\>/NLSR /ndn/edu/ucla/%C1.Router/rt1/NLSR  /ndn/edu/ucla/%C1.Router/rt1/NLSR/KEY/ksk-5/ID-CERT/%01
+root      /\<network\>                                          /ndn                               /ndn/KEY/1/%00/%01
+site      /\<network\>/\<site\>                                 /ndn/edu/ucla                      /ndn/edu/ucla/KEY/2/%00/%01
+operator  /\<network\>/\<site\>/%C1.Operator/\<operator-name\>  /ndn/edu/ucla/%C1.Operator/op1     /ndn/edu/ucla/%C1.Operator/op1/KEY/3/%00/%01
+router    /\<network\>/\<site\>/%C1.Router/\<router-name\>      /ndn/edu/ucla/%C1.Router/rt1       /ndn/edu/ucla/%C1.Router/rt1/KEY/4/%00/%01
+NLSR      /\<network\>/\<site\>/%C1.Router/\<router-name\>/NLSR /ndn/edu/ucla/%C1.Router/rt1/NLSR  /ndn/edu/ucla/%C1.Router/rt1/NLSR/KEY/5/%00/%01
 ========  ===================================================== =================================  ===============================================
 
 Users should create keys according to the naming and signing hierarchies above.
diff --git a/docs/release-notes/release-notes-0.4.1.rst b/docs/release-notes/release-notes-0.4.1.rst
new file mode 100644
index 0000000..30dac34
--- /dev/null
+++ b/docs/release-notes/release-notes-0.4.1.rst
@@ -0,0 +1,24 @@
+NLSR version 0.4.1
+++++++++++++++++++
+
+**New features**:
+
+- The routing table dataset publisher (:issue:`3630`)
+
+- Use ndn-cxx logging facility, remove log4cxx dependency (:issue:`3949`)
+
+- Automatic serving of other routers' certificates (:issue:`4448`)
+
+**Bug Fixes**:
+
+- Hard-code a fixed session name for ChronoSync sockets (:issue:`4513`)
+
+- Fix encoding bug in the routing table publisher (:issue:`4453`)
+
+- Fix NLSR not converging without content store (:issue:`4430`)
+
+**Miscellaneous Changes**:
+
+- Make ChronoSync's sync interest lifetime configurable (:issue:`4490`)
+
+- Print labels on adjacency matrix when logging (:issue:`2045`)
\ No newline at end of file
diff --git a/docs/releases.rst b/docs/releases.rst
index 126e753..ec161ff 100644
--- a/docs/releases.rst
+++ b/docs/releases.rst
@@ -5,6 +5,7 @@
    :hidden:
    :maxdepth: 1
 
+   release-notes/release-notes-0.4.1
    release-notes/release-notes-0.4.0
    release-notes/release-notes-0.3.2
    release-notes/release-notes-0.3.1
@@ -14,6 +15,12 @@
    release-notes/release-notes-0.2.0
    release-notes/release-notes-0.1.0
 
+* **NLSR version 0.4.1**
+  (:doc:`Release Notes <release-notes/release-notes-0.4.1>`, `Documentation <https://named-data.net/doc/NLSR/0.4.1/>`__)
+
+  `src (git) <https://github.com/named-data/NLSR/releases/tag/NLSR-0.4.1>`__,
+  `src (tarball) <https://named-data.net/downloads/nlsr-0.4.1.tar.bz2>`__ (`checksum <https://named-data.net/downloads/nlsr-0.4.1.tar.bz2.sha256>`__)
+
 * **NLSR version 0.4.0**
   (:doc:`Release Notes <release-notes/release-notes-0.4.0>`, `Documentation <https://named-data.net/doc/NLSR/0.4.0/>`__)
 
diff --git a/wscript b/wscript
index 76adf7a..fdef574 100644
--- a/wscript
+++ b/wscript
@@ -1,7 +1,7 @@
 # -*- Mode: python; py-indent-offset: 4; indent-tabs-mode: nil; coding: utf-8; -*-
 
 """
-Copyright (c) 2014-2017,  The University of Memphis,
+Copyright (c) 2014-2018,  The University of Memphis,
                           Regents of the University of California,
                           Arizona Board of Regents.
 
@@ -20,7 +20,7 @@
 NLSR, e.g., in COPYING.md file.  If not, see <http://www.gnu.org/licenses/>.
 """
 
-VERSION = "0.4.0"
+VERSION = "0.4.1"
 APPNAME = "nlsr"
 BUGREPORT = "https://redmine.named-data.net/projects/nlsr"
 URL = "https://named-data.net/doc/NLSR/"
@@ -60,12 +60,13 @@
 
     conf.check_boost(lib=boost_libs, mt=True)
 
-    if conf.env.BOOST_VERSION_NUMBER < 104800:
-        Logs.error("Minimum required boost version is 1.48.0")
-        Logs.error("Please upgrade your distribution or install custom boost libraries")
+    if conf.env.BOOST_VERSION_NUMBER < 105400:
+        Logs.error("Minimum required boost version is 1.54.0")
+        Logs.error("Please upgrade your distribution or install custom boost libraries" +
+                   " (https://redmine.named-data.net/projects/nfd/wiki/Boost_FAQ)")
         return
 
-    conf.check_cfg(package='ChronoSync', args=['ChronoSync >= 0.3', '--cflags', '--libs'],
+    conf.check_cfg(package='ChronoSync', args=['--cflags', '--libs'],
                    uselib_store='SYNC', mandatory=True)
 
     conf.load('coverage')