diff --git a/nfd.conf b/nfd.conf
new file mode 100644
index 0000000..a517020
--- /dev/null
+++ b/nfd.conf
@@ -0,0 +1,334 @@
+; The general section contains settings of nfd process.
+general
+{
+  ; Specify a user and/or group for NFD to drop privileges to
+  ; when not performing privileged tasks. NFD does not drop
+  ; privileges by default.
+
+  ; user ndn-user
+  ; group ndn-user
+}
+
+log
+{
+  ; default_level specifies the logging level for modules
+  ; that are not explicitly named. All debugging levels
+  ; listed above the selected value are enabled.
+  ;
+  ; Valid values:
+  ;
+  ;  NONE ; no messages
+  ;  ERROR ; error messages
+  ;  WARN ; warning messages
+  ;  INFO ; informational messages (default)
+  ;  DEBUG ; debugging messages
+  ;  TRACE ; trace messages (most verbose)
+  ;  ALL ; all messages
+
+  default_level INFO
+
+  ; You may override default_level by assigning a logging level
+  ; to the desired module name. Module names can be found in two ways:
+  ;
+  ; Run:
+  ;   nfd --modules
+  ;
+  ; Or look for NFD_LOG_INIT(<module name>) statements in .cpp files
+  ;
+  ; Example module-level settings:
+  ;
+  ; FibManager DEBUG
+  ; Forwarder INFO
+}
+
+; The tables section configures the CS, PIT, FIB, Strategy Choice, and Measurements
+tables
+{
+
+  ; ContentStore size limit in number of packets
+  ; default is 65536, about 500MB with 8KB packet size
+  cs_max_packets 65536
+
+  ; Set the forwarding strategy for the specified prefixes:
+  ;   <prefix> <strategy>
+  strategy_choice
+  {
+    /               /localhost/nfd/strategy/best-route
+    /localhost      /localhost/nfd/strategy/multicast
+    /localhost/nfd  /localhost/nfd/strategy/best-route
+    /ndn/broadcast  /localhost/nfd/strategy/multicast
+  }
+
+  ; Declare network region names
+  ; These are used for mobility support.  An Interest carrying a Link object is
+  ; assumed to have reached the producer region if any delegation name in the
+  ; Link object is a prefix of any region name.
+  network_region
+  {
+    ; /example/region1
+    ; /example/region2
+  }
+}
+
+; The face_system section defines what faces and channels are created.
+face_system
+{
+  ; The unix section contains settings of Unix stream faces and channels.
+  ; Unix channel is always listening; delete unix section to disable
+  ; Unix stream faces and channels.
+  ;
+  ; The ndn-cxx library expects unix:///var/run/nfd.sock
+  ; to be used as the default transport option. Please change
+  ; the "transport" field in client.conf to an appropriate tcp4 FaceUri
+  ; if you need to disable unix sockets.
+  unix
+  {
+    path /tmp/nfd.sock ; Unix stream listener path
+  }
+
+  ; The tcp section contains settings of TCP faces and channels.
+  tcp
+  {
+    listen yes ; set to 'no' to disable TCP listener, default 'yes'
+    port 6363 ; TCP listener port number
+    enable_v4 yes ; set to 'no' to disable IPv4 channels, default 'yes'
+    enable_v6 yes ; set to 'no' to disable IPv6 channels, default 'yes'
+  }
+
+  ; The udp section contains settings of UDP faces and channels.
+  ; UDP channel is always listening; delete udp section to disable UDP
+  udp
+  {
+    port 6363 ; UDP unicast port number
+    enable_v4 yes ; set to 'no' to disable IPv4 channels, default 'yes'
+    enable_v6 yes ; set to 'no' to disable IPv6 channels, default 'yes'
+
+    ; idle time (seconds) before closing a UDP unicast face, the actual timeout would be
+    ; anywhere within [idle_timeout, 2*idle_timeout), default is 600
+    idle_timeout 600
+
+    keep_alive_interval 25; interval (seconds) between keep-alive refreshes
+
+    ; UDP multicast settings
+    ; NFD creates one UDP multicast face per NIC
+    ;
+    ; In multi-homed Linux machines these settings will NOT work without
+    ; root or settings the appropriate permissions:
+    ;
+    ;    sudo setcap cap_net_raw=eip /full/path/nfd
+    ;
+    mcast yes ; set to 'no' to disable UDP multicast, default 'yes'
+    mcast_port 56363 ; UDP multicast port number
+    mcast_group 224.0.23.170 ; UDP multicast group (IPv4 only)
+  }
+
+  ; The ether section contains settings of Ethernet faces and channels.
+  ; These settings will NOT work without root or setting the appropriate
+  ; permissions:
+  ;
+  ;    sudo setcap cap_net_raw,cap_net_admin=eip /full/path/nfd
+  ;
+  ; You may need to install a package to use setcap:
+  ;
+  ; **Ubuntu:**
+  ;
+  ;    sudo apt-get install libcap2-bin
+  ;
+  ; **Mac OS X:**
+  ;
+  ;    curl https://bugs.wireshark.org/bugzilla/attachment.cgi?id=3373 -o ChmodBPF.tar.gz
+  ;    tar zxvf ChmodBPF.tar.gz
+  ;    open ChmodBPF/Install\ ChmodBPF.app
+  ;
+  ; or manually:
+  ;
+  ;    sudo chgrp admin /dev/bpf*
+  ;    sudo chmod g+rw /dev/bpf*
+
+  ; ether
+  ; {
+  ;   ; Ethernet multicast settings
+  ;   ; NFD creates one Ethernet multicast face per NIC
+  ; 
+  ;   mcast yes ; set to 'no' to disable Ethernet multicast, default 'yes'
+  ;   mcast_group 01:00:5E:00:17:AA ; Ethernet multicast group
+  ; }
+
+  ; The websocket section contains settings of WebSocket faces and channels.
+
+  websocket
+  {
+    listen yes ; set to 'no' to disable WebSocket listener, default 'yes'
+    port 9696 ; WebSocket listener port number
+    enable_v4 yes ; set to 'no' to disable listening on IPv4 socket, default 'yes'
+    enable_v6 yes ; set to 'no' to disable listening on IPv6 socket, default 'yes'
+  }
+}
+
+; The authorizations section grants privileges to authorized keys.
+authorizations
+{
+  ; An authorize section grants privileges to a NDN certificate.
+  authorize
+  {
+    ; If you do not already have NDN certificate, you can generate
+    ; one with the following commands.
+    ;
+    ; 1. Generate and install a self-signed identity certificate:
+    ;
+    ;      ndnsec-keygen /`whoami` | ndnsec-install-cert -
+    ;
+    ; Note that the argument to ndnsec-key will be the identity name of the
+    ; new key (in this case, /your-username). Identities are hierarchical NDN
+    ; names and may have multiple components (e.g. `/ndn/ucla/edu/alice`).
+    ; You may create additional keys and identities as you see fit.
+    ;
+    ; 2. Dump the NDN certificate to a file:
+    ;
+    ;      sudo mkdir -p /Users/cawka/Devel/ndn/NFD-Control-Center/build/deps/etc/ndn/keys/
+    ;      ndnsec-cert-dump -i /`whoami` >  default.ndncert
+    ;      sudo mv default.ndncert /Users/cawka/Devel/ndn/NFD-Control-Center/build/deps/etc/ndn/keys/default.ndncert
+    ;
+    ; The "certfile" field below specifies the default key directory for
+    ; your machine. You may move your newly created key to the location it
+    ; specifies or path.
+
+    ; certfile keys/default.ndncert ; NDN identity certificate file
+    certfile any ; "any" authorizes command interests signed under any certificate,
+                 ; i.e., no actual validation.
+    privileges ; set of privileges granted to this identity
+    {
+      faces
+      fib
+      strategy-choice
+    }
+  }
+
+  ; You may have multiple authorize sections that specify additional
+  ; certificates and their privileges.
+
+  ; authorize
+  ; {
+  ;   certfile keys/this_cert_does_not_exist.ndncert
+  ;   authorize
+  ;   privileges
+  ;   {
+  ;     faces
+  ;   }
+  ; }
+}
+
+rib
+{
+  ; The following localhost_security allows anyone to register routing entries in local RIB
+  localhost_security
+  {
+    trust-anchor
+    {
+      type any
+    }
+  }
+
+  ; localhop_security should be enabled when NFD runs on a hub.
+  ; "/localhop/nfd/fib" command prefix will be disabled when localhop_security section is missing.
+  ; localhop_security
+  ; {
+  ;   ; This section defines the trust model for NFD RIB Management. It consists of rules and
+  ;   ; trust-anchors, which are briefly defined in this file.  For more information refer to
+  ;   ; manpage of ndn-validator.conf:
+  ;   ;
+  ;   ;     man ndn-validator.conf
+  ;   ;
+  ;   ; A trust-anchor is a pre-trusted certificate.  This can be any certificate that is the
+  ;   ; root of certification chain (e.g., NDN testbed root certificate) or an existing
+  ;   ; default system certificate `default.ndncert`.
+  ;   ;
+  ;   ; A rule defines conditions a valid packet MUST have. A packet must satisfy one of the
+  ;   ; rules defined here. A rule can be broken into two parts: matching & checking. A packet
+  ;   ; will be matched against rules from the first to the last until a matched rule is
+  ;   ; encountered. The matched rule will be used to check the packet. If a packet does not
+  ;   ; match any rule, it will be treated as invalid.  The matching part of a rule consists
+  ;   ; of `for` and `filter` sections. They collectively define which packets can be checked
+  ;   ; with this rule. `for` defines packet type (data or interest) and `filter` defines
+  ;   ; conditions on other properties of a packet. Right now, you can only define conditions
+  ;   ; on packet name, and you can only specify ONLY ONE filter for packet name.  The
+  ;   ; checking part of a rule consists of `checker`, which defines the conditions that a
+  ;   ; VALID packet MUST have. See comments in checker section for more details.
+  ;
+  ;   rule
+  ;   {
+  ;     id "NRD Prefix Registration Command Rule"
+  ;     for interest                         ; rule for Interests (to validate CommandInterests)
+  ;     filter
+  ;     {
+  ;       type name                          ; condition on interest name (w/o signature)
+  ;       regex ^[<localhop><localhost>]<nfd><rib>[<register><unregister>]<>$ ; prefix before
+  ;                                                                           ; timestamp
+  ;     }
+  ;     checker
+  ;     {
+  ;       type customized
+  ;       sig-type rsa-sha256                ; interest must have a rsa-sha256 signature
+  ;       key-locator
+  ;       {
+  ;         type name                        ; key locator must be the certificate name of the
+  ;                                          ; signing key
+  ;         regex ^[^<KEY>]*<KEY><>*<ksk-.*><ID-CERT>$
+  ;       }
+  ;     }
+  ;   }
+  ;   rule
+  ;   {
+  ;     id "NDN Testbed Hierarchy Rule"
+  ;     for data                             ; rule for Data (to validate NDN certificates)
+  ;     filter
+  ;     {
+  ;       type name                          ; condition on data name
+  ;       regex ^[^<KEY>]*<KEY><>*<ksk-.*><ID-CERT><>$
+  ;     }
+  ;     checker
+  ;     {
+  ;       type hierarchical                  ; the certificate name of the signing key and
+  ;                                          ; the data name must follow the hierarchical model
+  ;       sig-type rsa-sha256                ; data must have a rsa-sha256 signature
+  ;     }
+  ;   }
+  ;   trust-anchor
+  ;   {
+  ;     type file
+  ;     file-name keys/default.ndncert ; the file name, by default this file should be placed in the
+  ;                                    ; same folder as this config file.
+  ;   }
+  ;   ; trust-anchor ; Can be repeated multiple times to specify multiple trust anchors
+  ;   ; {
+  ;   ;   type file
+  ;   ;   file-name keys/ndn-testbed.ndncert
+  ;   ; }
+  ; }
+
+  ; The following localhop_security should be enabled when NFD runs on a hub,
+  ; which accepts all remote registrations and is a short-term solution.
+  ; localhop_security
+  ; {
+  ;   trust-anchor
+  ;   {
+  ;     type any
+  ;   }
+  ; }
+
+  auto_prefix_propagate
+  {
+    cost 15 ; forwarding cost of prefix registered on remote router
+    timeout 10000 ; timeout (in milliseconds) of prefix registration command for propagation
+
+    refresh_interval 300 ; interval (in seconds) before refreshing the propagation
+    ; This setting should be less than face_system.udp.idle_time,
+    ; so that the face is kept alive on the remote router.
+
+    base_retry_wait 50 ; base wait time (in seconds) before retrying propagation
+    max_retry_wait 3600 ; maximum wait time (in seconds) before retrying propagation
+    ; for consequent retries, the wait time before each retry is calculated based on the back-off
+    ; policy. Initially, the wait time is set to base_retry_wait, then it will be doubled for every
+    ; retry unless beyond the max_retry_wait, in which case max_retry_wait is set as the wait time.
+  }
+}